 |
|
BlackHole.2.1.7.DM800HD.CLONE.SSL84D.SIM2.OE2.0.by marwen.12.07.2015
Alıntı:
12/07/2015: * New Enigma2 Compiled 12-07-2015
*Add new feature for old style remote controlling
When enabled you now have the Neutrino way of remote control:
-Enable 'neutrino' style zap controlling:
When enabled the arrow buttons around the OK button
will follow the 'neutrino' style zap controls instead of the enigma2 style
-Enable 'neutrino' style channel select controlling:
When enabled the left, right, CH+/-, B+/-, P+/- buttons
will follow the 'neutrino' style zap controls instead of the enigma2 style
*Make reverse bouquet buttons configurable
*Allow plugins to recursivaly close via menus
*MultiContent: Add flag to make it possible to scale pixmaps
*downloadWithProgress: support https with connectSSL
Downloading https page fails with "Connection was closed cleanly"
because downloadWithProgress uses connectTCP instead of connectSSL.
Using connectSSL for https solves the problem
|
Alıntı:
Old Style zap Neutrino
Remote Control for
keymap.xml
/usr/Share/enigma2
|
|
BlackHole.2.1.7.JULY.END.FIX.DM800HD.CLONE.SIM2.OE 2.0.bymarwen.SSL84D.26.07.2015
Alıntı:
26/07/2015: -ADD New Server BlackholeAddons V1.1
- New skin_default: fantasy_hd
|
Alıntı:
Old Style zap Neutrino
Remote Control for
keymap.xml
/usr/Share/enigma2
|
|
BlackHole.2.1.7.NEWFIX.DM800HD.CLONE.SSL84D.SIM2.O E2.0.bymarwen.21.08.2015
Alıntı:
21/08/2015:* New Enigma2 Compiled 21/08/2015
*skin_default: fantasy_hd updated
*Now usb keyboard Fixed for Blackhole
* rcinput et al: Implement hotplugging input devices
Add an interface to add/remove devices. Add a netlink socket to
listen for incoming hotplug events and (un)register input
devices.
Now you can (un)plug a keyboard while E2 is running.
* Network: Allow hotplug for network adapters
This allows to insert (e.g.) a WiFi stick while E2 is running. The
adapter will then be visible in the network menu.
*sanity check for fallback service when is wrong service reference in bouquet
*keymap.xml Fixed for InputAsciiActions
*Prevent plugins from crashing enigma at startup
*instantiateSummaryDialog allowing summaries to be created for non-modal screens
*Encoding.conf fixed for Thor 0.8W and Remove UPC-Direct Astra-1 transponder
|
|
BlackHole.2.1.7.September.DM800HD.CLONE.SSL84D.SIM 2.OE2.0.bymarwen.07.09.2015
Alıntı:
07/09/2015: New Enigma2 Compiled 07/09/2015
* BlackholeAddons: updated
* ADD New Patch for Teletext:
-Allow users to change key mapping via keymap.xml. As a result of it
volume and mute is working when teletext is visible
-Press Txt to open Teletext
-Press Menu to open Teletext Menu
* ADD Drivers for Usb keyboard: you can Plug your usb keyboard and Reboot dreambox
-kernel-module-usbhid
-kernel-module-usbserial
* ADD Arabic Language to VirtualKeyBoard
* ADD Azerty Keyboard
* Keyboard: use default.kmap by default
* Hotplug: updated
* InfobarPosition Fixed Crash: ADD Universe
* FixedMenu: Fix GS when trying to access a invalid Tuple
|
|
OpenPli4.0.IPTV.DM800HD.CLONE.SIM2.SSL84D.ByHouara .23.09.2015
Alıntı:
-Fixed many things,
-GStreamer pre-version 1.6, and many many other things working,
-as well as now when you record a stream it's saved as .ts instead of .stream and can be then easily replayed by the MediaPlayer.
-Feed links are included,
-we are now uploading the feeds to the servers.
-Wifi RT7777 is supported as well as RT5370/RT3070, naturally JAM 5.2 and IPTV list are preloaded as well.
|
OpenPlus.1.0.DM800HD.CLONE.SIM2.SSL84D.ByHouara.25 .09.2015
Alıntı:
EMU:
menu > LBpanel > Green button (CamEmu) > Blue button (install Emu) > Green button (install
menu > LBpanel > Green button (CamEmu) > Green Button (Start
REMOTE CONTROL:
About remote control How to adjustment >>
menu
setup
system
input device
press ok to dreambox remote control (native) and adjustment as you like ..
|
OpenNFR.5.1.DM800HD.CLONE.SIM2.SSL84D.ByHouara.27. 09.2015
Alıntı:
EMU:
Menu > Plugins > Green Button > SoftCams
Press Red Button > SoftcamPanel
SOFTCAM:
/usr/Keys
|
EuroSat.1.5.DM800HD.CLONE.SIM2.SSL84D.ByHouara.26. 09.2015
Alıntı:
SoftCams:
Menu > Euro Panel > Softcams
About remote control How to adjustment >>
menu
setup
system
input device
press ok to dreambox remote control (native) and adjustment as you like ..
|
PKT.Hyperion.v5.0.1.3172.DM800HD.CLONE.SIM2.SSL84D .ByHouara.27.09.2015
Alıntı:
Menu > Plugins Browser > Green Button > emu
Blue Button > EMU Manager
CCcam
usr/keys/
|
|
OpenPLi.4.0.Gstreamer1.7.0.DM800HD.CLONE.SSL84D.SI M2.OE2.0.byhoura.25.12.2015
Alıntı:
Changes since previous release:
- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- Removed the linux 2.6.18 kernel patch for ignoring the vermagic as it might be the cause of some instabilities.
Changes compared to openpli-oe-core gst-1:
- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cd[IMG]tinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
Known issues:
- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well
|
|
BlackHole.2.1.7.WilCard.DM800HD.CLONE.SSL84D.SIM2. OE2.0.bymarwen.09.01.2016
Alıntı:
09/01/2016: * New skin_default: Darkstar
- Support Ecminfo for Emu Wicardd
* Blackhole font size is Skinnable
- ADD Current Value
* BlackholeAddons updated:
- ADD Reload Setting (Reload Channel Lists)
- Now BlackholeAddons is in MainMenu (Menu-BlackholeAddons)
|
|
OpenPLi.4.0.NewGstreamer1.7.1.DM800HD.CLONE.SSL84D .SIM2.OE2.0.06.01.2016
Alıntı:
Changes since previous release:
- Gstreamer snapshot updated to 1.7.1:
* The mp4 issue when playing from remote locations has been fixed upstream,
so I've dropped the revert.
* Libsoup has been updated so I've dropped the revert for the
old libsoup as well.
- DM800Se V2 and DM500HD V2 kernel config has been
cleaned and more in sync with PLi's config for the other Dreambox models.
- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.
* This should give us a few more MBs to work with (Dreambox *cough*).
- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.
* Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.
* Enable of the zram module.
* Shipping his wifi drivers.
* VFD time is now synced every 5 minutes using a cron job.
* Software update and plugin-installation has been fixed.
* Using Tapaat's lirc config for spark and spark7162.
- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:
* A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.
- Libsoup has been updated to 2.52 (from master-next).
- Refactor wifi drivers a bit on Linux 2.6.18,
not auto-loading the mt7600 anymore,
the correct driver should hopefully be loaded
when you plugin your wifi stick.
Changes compared to openpli-oe-core gst-1:
- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers
(ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
Known issues:
- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
Please use 'duckbox' instead.
- On Zgemma Star you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
TODO:
- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to
load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.
- Linux 2.6.18: Look into the v4l usb drivers.
- Add Spark specific plugins by gorski.
- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.
|
|
BlackHole.2.1.7.NewFix.DM800HD.CLONE.SSL84D.SIM2.O E2.0.bymarwen.21.01.2016
Alıntı:
21/01/2016: * New Enigma2 Compiled
* Allow gstreamer to convert the audio when the dvbaudiosink doesn't
support the format
* servicemp3:
- follow GstBuffer API changes
- follow gstreamer api changes
- fix gstreamer assertions, iterating elements
- add sanitychecks on subtitle caps
- fix getting text-tags
- support text/x-raw subtitle caps
* servicedvb: allow timeshift to be started on an http ts stream
* Export timeshift helper functions
* channelselection:
From setup menu in channelselection go back to channelselection.
So you can toggle channelselectioncontextmenuCustomise
and configchannelselection
* Fix crash when writing epg cache to the disk:
Timestamp in contentTimeMap can differ from eventData timestamp.
In such cases eventData is not removed from timeMap. timeMap is
used in eEPGCache::save which accesses in such a case freed memory.
This can cause crash.
|
|
BlackHole.3.0.2C.Fix.DM800HD.CLONE.SSL84D.SIM2.OE2 .0.bymarwen.21.06.2016
Alıntı:
21/06/2016: * Fix Crash on Timer Editor(Menu-Timer)
* Restructure Main Menu
* First boot:Add bootlogo_wait(Loading Default)
*skin_default:Add screensaverpicture and timer icons
* Fix-tspanel-crash-setup
* BlackholeAddons updated:Add Oscam1.20 v2.45
|
|
| Bütün Zaman Ayarları WEZ +3 olarak düzenlenmiştir. Şu Anki Saat: 17:26 . |
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Dizayn ve Kurulum : Makinist